We use our own and third-party cookies to improve our services, provide quicker access to these services and personalise them by analysing your browsing habits. By continuing to browse this site you are agreeing to their use. Further information is available in our cookies policy.x
Ice Pigging was selected because of its speed and simplicity to clean 650m of a 150mm stainless steel pipe that was unable to keep up with required flows.
Ice Pigging was used to clean and clear a waste effluent main that was experiencing decreased flow rates due to a build-up of abattoir waste in it's pipe wall. Approximately 2000m of MDPE piping was cleaned in just two visits, showing significant improvement of 100%.
Ice Pigging was used to clean a section of a dairy rising main to remove dairy waste, the total length of pipe cleaned was 1638m with the aim of increasing the pumping rate.
Heavy bio-fouling had been identified in a waste pipe on one of Zeon Chemical's sites in South Wales. This had resulted in a reduction in pipeline flow rates. If bio-fouling was to continue to increase, then this would result in a major jetting project resulting in high costs and enabling works.
Ice Pigging was used to clean a sewer pipe because of a wet-well that kept overflowing due to the high amount of sediment and waste that had accumulated in the pipe.